Gnss Positioning Module with High-Quality Observation Data Output

• Customization: Available
• Chip: \
• Support Network: \
• Model NO.: NAV3310SAB
• Certification: RoHS
• Warranty: 1 Year
• Encapsulation: Lcc 24pin
• Operating Temperature: -40~+85℃
• Weight: 1g
• Number of Channels: 135
• Power Consumption (Rtc): 60ua.@ Vcc=3.3V
• Speed Accuracy: ≤ 0.1 M/S Cep
• Transport Package: Box; Sponge
• Specification: 16mm*12.2mm*2.4mm
• Trademark: Firepower
• Origin: China

Product Description

Product Description

Multi-system Dual-frequency High-precision GNSS Positioning Module

NAV3310SAB multi-system dual-frequency high-precision GNSS module, based on independent research and development of MTKAG3335at chip, supports BDS/GPS/GLONASS/Galileo/QZSS signal reception, fully supports the new generation of Beidou global satellite signals and built-in RTK algorithm. It can provide high-quality observation data and position, speed and time information, and is suitable for IOT equipment and vehicle terminals with high requirements for positioning accuracy and power consumption.

Specification

Mechanical properties
Mechanical dimension (mm)	16 * 12.2 * 2.4
Encapsulation	LCC 24Pin
Weight, g	1
Temperature range
Operating temperature	-40℃ ~ +85℃
Storage temperature	-40℃ ~ +90℃
GNSS characteristics
Supported frequency bands	GPS/QZSS: L1 C/A; L5 Galileo: E1; E5a BeiDou: B1I; B2A GLONASSP: L1 NAVIC
Function	PVT positioning/RTK positioning/GNSS raw data
Number of channels	Channel 135
Position accuracy	Single point positioning: ≤ 1 m CEP RTK: ≤0.02m+1ppm CEP (Room temperature, open environment, signal power -130dBm)
Speed accuracy	≤ 0.1 m/s CEP
TTFF	Cold start: ≤ 28 s Warm start: ≤ 20 s Hot start: ≤ 2 s Re-capture: ≤ 2 s (preliminary data)
Sensitivity	Capture (cold start): -148 dBm Tracking: -166 dBm Re-capture: -158 dBm (Preliminary data)
Dynamic performance	Maximum altitude: 18000 m Maximum speed: 500 m/s Maximum acceleration: 4.0 G
Maximum update ratio	GNSS raw data: 1 Hz PVT: 1 Hz RTK: 1 Hz
Interface
UART	Quantity: 3 Adjustable baud rate: 9600 ~ 921600 bps Default baud rate: 115200 bps
Agreement
Supported protocols	NMEA 0183/RTCM 3.x
External antenna interface
Antenna type	Active antenna
Antenna power supply	Externally provided
Electrical characteristics
Supply voltage range	2.8 V to 4.3 V, 3.3 V recommended
Power consumption (capture)	30mA.@ VCC=3.3 V
Power Consumption (Sleep)	340uA.@ VCC=3.3 V
Power consumption (RTC)	60uA.@ VCC=3.3V

Company Profile

Shenzhen Firepower Control Technology Co., Ltd, was established in 2013 and registered in Shenzhen.

The company is high-tech enterprise dedicated to R&D and production of vibration acceleration sensors, MEMS gyro, IMU, INS, angle testing equipment and other products. The company has invested in and built multiple automated production lines in various locations such as Xi'an, Shenzhen, and Zhuhai. These production lines cover the manufacturing of MEMS gyro, MEMS inertial navigation systems, vibration acceleration sensors, communication products, and angle test equipment.

As an independent innovation-oriented high-tech enterprise, Firepower possesses China's leading production conditions for inertial navigation and communication products. The company always prioritizes scientific research and technological innovation, as well as self-reliance and control. It is committed to developing a series of autonomous navigation products with independent intellectual property rights, which are widely applied in the autonomous navigation perception fields of civilian vehicles and ships. With its self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products that can provide users' carriers with key information such as current position, three-dimensional attitude, and speed, thereby achieving precise autonomous navigation control.

After Sales Service

Exhibitions

Packing & Delivery

FAQ

Q: What is your lead time?
A: Stock: 5-15 days in general. No stock: 15-30 days after samples confirmed. Or please contact us by email for specific lead time based on your order quantities.
Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end:
1) We produce product according agreed technical requirements strictly;
2) We do full tests according to test methology;
3) We have a professional QA/QC team to ensure the quality.
Q: Do you accept OEM or ODM order?
A: Yes, we are professional manufacturer and we are capable for providing both OEM and ODM service by customer's needs.
Q: What are the terms of delivery?
A: We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.
Q: What is the payment way?
A: TT, L/C, Pay later, West Union, Online Bank Payment.
Q: What is warranty?
A: Standardly 12 months and negotiable for longer warranty.
Q: What is the packing quality?
A: For sample order, we use carton box with sponge, and batch order, we use wooden box.
Q: What is final price?
A: For standard product, price is as in the price table; For customized product, price by checking with sales, so as to different quantity needs.
Q: How to choose product?
A: We are professional manufacturer, we could provide standard product on shelf, or products by customer's specific requirements:
1) Choose from MadeinChnia platform or website;
2) Customer raise some certain different technical requirements based on standard products;
3) Customer provide specific and comprehensive technical requirements to sales to evaluate;
4) Customer explain application to sales to provide suitable products.