High Performance Sensor 9 Axis Inertial Measurement Unit

• Customization: Available
• Type: Servo
• Output Signal Type: Digital Output
• Model NO.: 16488C
• Measuring Shaft Quantities: Three
• Accuracy Grade: 1.0G
• IP Rating: IP56
• Certification: CE
• Customized: Customized
• Shock: 2000g,0.1ms
• Power Supply: 5±0.5V
• Working Temperature: -45~+85ºC
• Zero Bias Instability Gyro: 1°/H(Allan Variance)
• Measuring Range Gyro: 500°/S
• Bandwidth: 280Hz
• Power: 5±0.5V
• Angular Random Walk: 0.13°/H1/2
• Transport Package: Box; Sponge
• Specification: 44mm*47mm*14mm
• Trademark: Firepower
• Origin: China

Product Description

Product Description

The 16488C is a high-performance inertial measurement unit that is precisely calibrated over the full temperature range to meet performance requirements under varying conditions. Built-in three-axis gyroscope and three-axis accelerometer are  used to measure the three-axis angular rate, acceleration and other parameters of the carrier, and output the data after error compensation (including temperature compensation, installation misalignment angle compensation, nonlinear compensation, etc.) through SPI according to the communication protocol.

 

Technical Parameters

Parameters		Test conditions	16488C	Unit
Gyroscope	Dynamic measuring range		±450	°/s
	Zero bias instability	Allan variance, better than	5	°/h
	Zero bias stability	10s smooth, RMS, better than	10	°/h
	Zero bias in full temperature range	-40ºC~85ºC, 10s smooth, RMS	60	°/h
	Random walk	1 σ	0.26	°/√h
	Zero-bias repeatability	1 σ	20	°/h
	Scale fcator repeatability	1 σ	200	ppm
	Scale factor nonlinearity	FS=450°/s	200	ppm
	Bandwidth (-3dB)		330	Hz
	Cross coupling		0.2	%
Accelerometer	Dynamic measuring range	Configurable (Max±40)	±20	g
	Zero bias stability	Allan variance	0.07	mg
	Zero bias in full temperature range	-40ºC~85ºC, 10s smooth, RMS	3	mg
	Random walk	1 σ	0.029	m/s/√h
	Zero-bias repeatability	1 σ	0.5	mg
	Scale factor repeatability		500	ppm
	Scale factor nonlinearity	1σFS=10g	500	ppm
	Bandwidth (-3dB)		250	Hz
	Cross coupling		0.2	%
Magnetometer	Dynamic measuring range		±2.5	gauss
	Sensitivity		0.1	mgauss/LSB
Barometer	Pressure range		300~1100	mbar
	Sensitivity		6.1×10^-7	mbar/LSB
Electrical characteristics	Voltage	Direct current	3.3 (or 5)±10%	V
	Power consumption		0.5	W
	Weight		48±2	g
Use environment	Operating temperature	Scalable	-40~+85	ºC
	Storage temperature		-55~+85	ºC

 

 

 

 

 

 

 

 

 

 

 

 

 

Company Profile

Shenzhen Firepower Control Technology Co., Ltd, was established in 2013 and registered in Shenzhen, The company is high-tech enterprise dedicated to R&D and production of quartz accelerometer, FOG, IMU, INS, Angle testing equipment and other products. The company has invested in and built multiple automated production lines in various locations such as Xi'an, Shenzhen, and Zhuhai. These production lines cover the manufacturing of fiber optic gyroscopes, MEMS inertial navigation systems, quartz accelerometers, electronic countermeasure communication products, and inertial simulation equipment. As an independent innovation-oriented high-tech enterprise, Firepower possesses China's leading production conditions for inertial navigation and electronic countermeasure products. The company always prioritizes scientific research and technological innovation, as well as self-reliance and control. It is committed to developing a series of autonomous navigation products with independent intellectual property rights, which are widely applied in the autonomous navigation perception fields of unmanned aerial vehicles, vehicles, and ships. With its self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products that can provide users' carriers with key information such as current position, three-dimensional attitude, and speed, thereby achieving precise autonomous navigation control.

Company Advantage

Our Services

Exhibitions

Packaging&Shipping

FAQ

Q: What is your lead time?
A: Stock: 5-15 days in general. No stock: 15-30 days after samples confirmed. Or please contact us by email for specific lead time based on your order quantities.

Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end:
1) We produce product according agreed technical requirements strictly;
2) We do full tests according to test methology;
3) We have a professional QA/QC team to ensure the quality.

Q: Do you accept OEM or ODM order?
A: Yes, we are professional manufacturer and we are capable for providing both OEM and ODM service by customer's needs.

Q: What are the terms of delivery?
A: We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.

Q: What is the payment way?
A: TT, L/C, Pay later, West Union, Online Bank Payment.

Q: What is warranty?
A: Standardly 12 months and negotiable for longer warranty.

Q: What is the packing quality?
A: For sample order, we use carton box with sponge, and batch order, we use wooden box.

Q: What is final price?
A: For standard product, price is as in the price table; For customized product, price by checking with sales, so as to different quantity needs.

Q: How to choose product?
A: We are professional manufacturer, we could provide standard product on shelf, or products by customer's specific requirements:
1) Choose from MadeinChnia platform or website;
2) Customer raise some certain different technical requirements based on standard products;
3) Customer provide specific and comprehensive technical requirements to sales to evaluate;
4) Customer explain application to sales to provide suitable products.