| Customization: | Available |
|---|---|
| Measuring Shaft Quantities: | Three |
| Accuracy Grade: | 1 Cm |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IMU-100B Industrial grade is a high-precision integrated navigation system. It is equipped with three self-developed 40 fiber optic gyroscopes, three-self MEMS accelerometers and GNSS modules, and realizes high-precision positioning and navigation in complex environments through multi-sensor fusion and integrated navigation algorithm. The product has high reliability and strong environmental adaptability. The products can be widely used in intelligent driving, UAV, surveying and mapping, marine compass, stable platform, photoelectric pod, underwater vehicle and other fields.
Main functions of the integrated navigation system are as follows:
Wide measurement range, built-in multi-mode satellite navigation system, angular rate, linear acceleration, synchronization signal acquisition. Selectable accelerometer measurement range,built-in high precision crystal oscillator, time synchronization error within 1ppm.Support secondary development,the technical status of the shock absorber is optional.
Typical applications:
1. Power inspection, mapping, robot
2. Platform stabilization, UAV, transportation, etc.
Gyro technology
| Project | Indicators | Remark | |
Gyro |
Measuring range | -300°/s ~+300°/s | |
| Resolution | ≤0.5°/h | ||
| Bias residual | -1.0°/h ~+1.0°/h | ||
| Random walk | 0.05 o / h | ||
| Biasstability at room temperature | ≤0.3°/h(1σ) | 10 seconds smoothing, 1H test result | |
| Biasstability at full temperature | ≤0.5°/h(1σ) | 10 seconds smoothing, 1H test result | |
| Normal-temperature Biasrepeatability | ≤0.3°/h(1σ) | Statistics of 6 test data | |
| Biasrepeatability at full temperature | ≤0.5°/h(1σ) | Take 2 Biasdata at full temperature, high temperature, low temperature and normal temperature respectively | |
| Scale factor nonlinearity | ≤200ppm | Full temperature and constant temperature | |
| Scale factor repeatability | ≤200ppm(1σ) | Full temperature and constant temperature | |
| Gyro start time | ≤5s | ||
| Gyro bandwidth | 300Hz | Design assurance, batch testing | |
| Installation error residual of three-axis gyroscope | ≤30" | ||
| Project | Indicators | Remark | |
Acceleration |
Measuring range | -50g ~ +50g | Design and selection guarantee |
| Scale factor nonlinearity | ≤200ppm | Design and selection guarantee | |
| Biasstability at full temperature | ≤100ug(1σ) | 10 seconds smoothing, 1H test result | |
| Biasrepeatability at full temperature | ≤100ug(1σ) | Take 2 Biasdata at full temperature, high temperature, low temperature and normal temperature respectively | |
| Scale factor repeatability | ≤100ppm(1σ) | Design and selection guarantee | |
| Random walk | ≤0.02m/s/h1/2 | ||
| Add up the starting time | ≤5s | ||
| Triaxial addition installation error residual | ≤30" | ||
|
||||||||||||||||||||||||||||||||||||||||
| Project | Indicators | Remark | |
Inertial navigation accuracy |
Accuracy of course angle maintenance | ≤2°/h | |
| Pitch Angle Holding Accuracy | ≤0.2°/h | ||
| Accuracy of roll angle maintenance | ≤0.2°/h | ||
| Pure inertial positioning accuracy | ≤20m(100s) | CEP, without external information assistance | |
| Position positioning accuracy of odometer integrated navigation | ≤ 0.2% (mileage greater than 3 km) | ||
| Position positioning accuracy of odometer integrated navigation | ≤1m(50s) | ||
Shenzhen Firepower Control Technology Co., Ltd, was established in 2013 and registered in Shenzhen, The company is high-tech enterprise dedicated to R&D and production of quartz accelerometer, FOG, IMU, INS, Angle testing equipment and other products. The company has invested in and built multiple automated production lines in various locations such as Xi'an, Shenzhen, and Zhuhai. These production lines cover the manufacturing of fiber optic gyroscopes, MEMS inertial navigation systems, quartz accelerometers, electronic countermeasure communication products, and inertial simulation equipment. As an independent innovation-oriented high-tech enterprise, Firepower possesses China's leading production conditions for inertial navigation and electronic countermeasure products. The company always prioritizes scientific research and technological innovation, as well as self-reliance and control. It is committed to developing a series of autonomous navigation products with independent intellectual property rights, which are widely applied in the autonomous navigation perception fields of unmanned aerial vehicles, vehicles, and ships. With its self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products that can provide users' carriers with key information such as current position, three-dimensional attitude, and speed, thereby achieving precise autonomous navigation control.
Q: What is your lead time?
A: Stock: 5-15 days in general. No stock: 15-30 days after samples confirmed. Or please contact us by email for specific lead time based on your order quantities.
Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end:
1) We produce product according agreed technical requirements strictly;
2) We do full tests according to test methology;
3) We have a professional QA/QC team to ensure the quality.
Q: Do you accept OEM or ODM order?
A: Yes, we are professional manufacturer and we are capable for providing both OEM and ODM service by customer's needs.
Q: What are the terms of delivery?
A: We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.
Q: What is the payment way?
A: TT, L/C, Pay later, West Union, Online Bank Payment.
Q: What is warranty?
A: Standardly 12 months and negotiable for longer warranty.
Q: What is the packing quality?
A: For sample order, we use carton box with sponge, and batch order, we use wooden box.
Q: What is final price?
A: For standard product, price is as in the price table; For customized product, price by checking with sales, so as to different quantity needs.
Q: How to choose product?
A: We are professional manufacturer, we could provide standard product on shelf, or products by customer's specific requirements:
1) Choose from MadeinChnia platform or website;
2) Customer raise some certain different technical requirements based on standard products;
3) Customer provide specific and comprehensive technical requirements to sales to evaluate;
4) Customer explain application to sales to provide suitable products;
){kind=link}