| Customization: | Available |
|---|---|
| Type: | Servo |
| Measuring Shaft Quantities: | Three |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The IMU200G-A0 is an inertial measurement unit (IMU) based on Microelectromechanical Systems (MEMS) with built-in high-performance MEMS gyroscope and MEMS accelerometer, which outputs 3 angular velocities and 3 accelerations.
IMU200G-A0 has high reliability and strong environmental adaptability. By matching different software, the product can be widely used in unmanned motion carrier, automatic driving, stable platform and other fields.
Product features
1) Three-axis digital gyroscope:
A) ± 500º/s (MAX: ± 2000 °/s) dynamic measurement range;
B) Zero bias stability: 10 °/h (GJB, 10s), 2.0 °/h (ALLAN);
2) Triaxial digital accelerometer:
A) ± 16g (MAX: ± 200g) dynamic measurement range;
B) Zero bias stability: 0.5mg (GJB, 10S), 0.1mg (ALLAN);
3) High reliability: MTBF > 20000h;
4) Guaranteed accuracy within the full temperature range (-40 ºC ~ 80 ºC):
built-in high-performance temperature calibration and compensation algorithm;
5) Suitable for working under strong vibration conditions
6) Interface 1-way UART
| Parameter | Test conditions | Typical value | Unit | ||
| Gyroscope | Range | Turntable | 500,1000,2000 | °/s | |
| Zero bias | Stability | 10 s average, + 70 ºC, + 20 ºC, -40 ºC | 10 | °/h | |
| Allan variance, + 20 ºC | 2 | °/h | |||
| Zero bias full temperature variation | -40 ºC ~ + 70 ºC, 1 ºC/min, 10 s average, 1σ | ±0.05 | °/s | ||
| Zero bias | Zero bias range | ±0.1 | °/s | ||
| Scale factor | Non-linearity | +20ºC | 0.01 | %FS | |
| Scale factor accuracy | Life-cycle variation, accelerated testing | 0.2 | %FS | ||
| Acceleration sensitive term | 8 | °/h/g | |||
| Bandwidth | 3dB | 200 | Hz | ||
| Data delay | Excluding transmission time | <5 | ms | ||
| Accelerometer | Range | 16,200 | g | ||
| Zero bias | Stability | 10 s average, + 70 ºC, + 20 ºC, -40 ºC | 0.5 | mg | |
| Allan variance, + 20 ºC | 0.1 | mg | |||
| Zero bias full temperature variation | -40 ºC ~ + 70 ºC, 1 ºC/min variation | 1 | mg | ||
| Zero bias | Zero bias range | 5 | mg | ||
| Scale factor | Start-by-start repeatability | +70ºC,+20ºC,-40ºC | 100 | ppm | |
| Non-linearity | +20ºC | 0.02 | %FS | ||
| Scale factor accuracy | Life-cycle variation, accelerated test instead | 0.3 | %FS | ||
| Bandwidth | 3dB | 200 | Hz | ||
| Start time | Time from power-on to output valid data | 500 | ms | ||
| 3 gyro axes and 3 acceleration axes The degree of nonorthogonality between any two ax |
+70ºC,+20ºC,-40ºC | 0.05 | ° | ||
| Overall dimensions | 22.4×24×9 | mm | |||
| Weight | 10 | g | |||
| Power supply | 5±0.1 | V | |||
| Power consumption | 0.8 | W | |||
| Use environment | Operating temperature | -40~+80 | ºC | ||
| Storage temperature | -45~+85 | ºC | |||
| Impact | 1000g,0.5ms | ||||
| Vibration | 20~2000Hz, 6.06g |
||||
| Communication update rate | 1-way UART | 500 (default) 1000 (Max) |
Hz | ||
| Communication baud rate | 1-way UART | 460.8 (default) 921.6 (Max) |
kbps | ||
Shenzhen Firepower Control Technology Co., Ltd, was established in 2013 and registered in Shenzhen, The company is high-tech enterprise dedicated to R&D and production of vibration acceleration sensors, MEMS gyro, IMU, INS, angle testing equipment and other products. The company has invested in and built multiple automated production lines in various locations such as Xi'an, Shenzhen, and Zhuhai. These production lines cover the manufacturing of MEMS gyro, MEMS inertial navigation systems, vibration acceleration sensors, communication products, and angle test equipment. As an independent innovation-oriented high-tech enterprise, Firepower possesses China's leading production conditions for inertial navigation and communication products. The company always prioritizes scientific research and technological innovation, as well as self-reliance and control. It is committed to developing a series of autonomous navigation products with independent intellectual property rights, which are widely applied in the autonomous navigation perception fields of civilian vehicles and ships. With its self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products that can provide users' carriers with key information such as current position, three-dimensional attitude, and speed, thereby achieving precise autonomous navigation control.
Q: What is your lead time?
A: Stock: 5-15 days in general. No stock: 15-30 days after samples confirmed. Or please contact us by email for specific lead time based on your order quantities.
Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end:
1) We produce product according agreed technical requirements strictly;
2) We do full tests according to test methology;
3) We have a professional QA/QC team to ensure the quality.
Q: Do you accept OEM or ODM order?
A: Yes, we are professional manufacturer and we are capable for providing both OEM and ODM service by customer's needs.
Q: What are the terms of delivery?
A: We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.
Q: What is the payment way?
A: TT, L/C, Pay later, West Union, Online Bank Payment.
Q: What is warranty?
A: Standardly 12 months and negotiable for longer warranty.
Q: What is the packing quality?
A: For sample order, we use carton box with sponge, and batch order, we use wooden box.
Q: What is final price?
A: For standard product, price is as in the price table; For customized product, price by checking with sales, so as to different quantity needs.
Q: How to choose product?
A: We are professional manufacturer, we could provide standard product on shelf, or products by customer's specific requirements:
1) Choose from MadeinChnia platform or website;
2) Customer raise some certain different technical requirements based on standard products;
3) Customer provide specific and comprehensive technical requirements to sales to evaluate;
4) Customer explain application to sales to provide suitable products;
){kind=link}