| Customization: | Available |
|---|---|
| Measuring Shaft Quantities: | Three |
| Accuracy Grade: | 0.1deg |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Project | Metrics (RMS) | Remark | |
| Heading accuracy | GNSS valid | 0.1° | |
| Heading holding | 0.2°/min | GNSS failure | |
| Attitude accuracy | GNSS is valid | 0.1° | Single-point L1/L2, RTK |
| Attitude holding | 0.2°/min | GNSS failure | |
| Positioning accuracy | Horizontal, GNSS valid; RTK | 1.5m;1cm+1ppm | Single point L1/L2; Differential |
| Elevation, GNSS valid; RTK | 2.5m;2cm+1ppm | Single point L1/L2; Differential | |
| Position holding, GNSS failure | 20m | Unlocked for 60s | |
| Horizontal velocity accuracy | GNSS is valid | 0.1m/s | Single-point L1/L2,RTK |
| Gyroscope | Measuring range | ±500°/s | |
| Zero bias stability | 4°/h | Allan variance | |
| Accelerometer | Measuring range | ±16g | Customizable 200 g |
| Zero bias stability | 0.2mg | Allan variance | |
| Satellite board | Cold start | < 30 seconds | Open environment |
| Hot start | 5 seconds | Open environment | |
| Type of receiver | BDS B1I/B2I/B3I GPS L1C/A/L2P (Y)/L2C/L5 GLONASS G1/G2 Galileo E1/E5a/E5b QZSS L1/L2/L5 |
||
| Communication interface | RS232 | Route 2 | |
| RS422 | Route 1 | ||
| Electrical characteristics | Voltage | 9~36VDC | |
| Power consumption | ≤3W | ||
| Ripple | 100 mV | P-P | |
| Structural characteristics | Size | 80 mm×53 mm×23mm | |
| Weight | ≤150g | ||
| Use environment | Operating temperature | -40ºC~+60ºC | |
| Storage temperature | -45ºC~+65ºC | ||
| Vibration | 20~2000Hz,6.06g | ||
| Impact | 30g,11ms | ||
| Degree of protection | IP65 | ||
| Reliability | MTBF | 30000h | |
| Life span | > 15 years | ||
| Continuous working time | >24h | ||
| Effective 2m baseline of dual antenna, or dynamic alignment of single antenna | |||
Shenzhen Firepower Control Technology Co., Ltd, was established in 2013 and registered in Shenzhen, The company is high-tech enterprise dedicated to R&D and production of quartz accelerometer, FOG, IMU, INS, Angle testing equipment and other products. The company has invested in and built multiple automated production lines in various locations such as Xi'an, Shenzhen, and Zhuhai. These production lines cover the manufacturing of fiber optic gyroscopes, MEMS inertial navigation systems, quartz accelerometers, electronic countermeasure communication products, and inertial simulation equipment. As an independent innovation-oriented high-tech enterprise, Firepower possesses China's leading production conditions for inertial navigation and electronic countermeasure products. The company always prioritizes scientific research and technological innovation, as well as self-reliance and control. It is committed to developing a series of autonomous navigation products with independent intellectual property rights, which are widely applied in the autonomous navigation perception fields of unmanned aerial vehicles, vehicles, and ships. With its self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products that can provide users' carriers with key information such as current position, three-dimensional attitude, and speed, thereby achieving precise autonomous navigation control.
Q: What is your lead time?
A: Stock: 5-15 days in general. No stock: 15-30 days after samples confirmed. Or please contact us by email for specific lead time based on your order quantities.
Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end:
1) We produce product according agreed technical requirements strictly;
2) We do full tests according to test methology;
3) We have a professional QA/QC team to ensure the quality.
Q: Do you accept OEM or ODM order?
A: Yes, we are professional manufacturer and we are capable for providing both OEM and ODM service by customer's needs.
Q: What are the terms of delivery?
A: We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.
Q: What is the payment way?
A: TT, L/C, Pay later, West Union, Online Bank Payment.
Q: What is warranty?
A: Standardly 12 months and negotiable for longer warranty.
Q: What is the packing quality?
A: For sample order, we use carton box with sponge, and batch order, we use wooden box.
Q: What is final price?
A: For standard product, price is as in the price table; For customized product, price by checking with sales, so as to different quantity needs.
Q: How to choose product?
A: We are professional manufacturer, we could provide standard product on shelf, or products by customer's specific requirements:
1) Choose from MadeinChnia platform or website;
2) Customer raise some certain different technical requirements based on standard products;
3) Customer provide specific and comprehensive technical requirements to sales to evaluate;
4) Customer explain application to sales to provide suitable products;
){kind=link}