Inertial Sensor Inertial Measurement Unit with Fast Dynamic Response

• Customization: Available
• Type: Servo
• Output Signal Type: Digital Output
• Model NO.: IMU6-1A
• Measuring Shaft Quantities: Three
• Accuracy Grade: 0.2G
• IP Rating: IP56
• Certification: CE
• Customized: Customized
• Gyro Measuring Range: 400°/S
• Gyro Zero Bias Stability: 2°/H (1s Smooth, 1 Sigma, Room Temperature)
• Gyro Bandwidth: 125Hz
• Accelerometer Measuring Range: ±10g
• Accelerometer Zero Bias Stability: 0.05mg (10s, 1 Sigma, Room Temperature)
• Accelerometer Bandwidth: 125Hz
• Transport Package: Box; Sponge
• Specification: 44.8mm*38.6mm*20mm
• Trademark: Firepower
• Origin: China

Product Description

Product Description

 

   The MEMS inertial measurement unit consists of a three-axis gyroscope, a three-axis acceleration meter, a three-axis inclination angle, a temperature sensor, a signal processing board, a structure and necessary software, and is used for measuring three-axis angular rate, three-axis acceleration and three-axis inclination angle of a carrier. And output that gyro, the loading table and the inclination data aft error compensation (including temperature compensation, installation misalignment angle compensation, nonlinear compensation and the like) through an RS-422 serial port according to an agreed communication protocol.
 

Technical Parameters

Parameter		Unit	IMU6-1A
Gyroscope	Measuring range (Customizable)	°/s	±400
	Zero offset	°/h	15
	Zero bias instability (@Allan Variance)	°/h	0.3
	Zero bias stability (1s smooth, 1 σ, room temperature)	°/h	3
	Zero bias repeatability	°/h	3
	Zero bias error over full temperature range	°/h	20
	Random walk	°/√h	0.15
	Zero bias acceleration sensitivity	°/h/g	2
	Resolution	°/h	2
	Output noise (Half peak value)	°/s	0.3
	Bandwidth	Hz	125
	Scale factor nonlinearity	ppm	100
	Scale factor repeatability	ppm	100
	Cross coupling	%	0.1
Accelerometer	Measuring range (Customizable)	g	±10
	Zero bias stability (10s, 1 σ, room temperature)	mg	0.05
	Zero bias repeatability	mg	0.2
	Zero bias error over full temperature range	mg	2
	Resolution	mg	0.1
	Bandwidth	Hz	125
	Scale factor repeatability	ppm	500
	Scale factor nonlinearity	ppm	500
	Cross coupling	%	0.1
Inclinometer	Range	g	±1.7 (This function is optional)
Electrical parameters	Startup stabilization time	s	0.5
	Data update rate	Hz	500
	Operating voltage	V	5±0.5
	Power consumption	W	≤1.5
	Ripple	mV	100
	Weight	g	≤58
	Size	mm	44.8*38.6*20
	Interface		RS422

 

Company Profile

Shenzhen Firepower Control Technology Co., Ltd, was established in 2013 and registered in Shenzhen, The company is high-tech enterprise dedicated to R&D and production of quartz accelerometer, FOG, IMU, INS, Angle testing equipment and other products. The company has invested in and built multiple automated production lines in various locations such as Xi'an, Shenzhen, and Zhuhai. These production lines cover the manufacturing of fiber optic gyroscopes, MEMS inertial navigation systems, quartz accelerometers, electronic countermeasure communication products, and inertial simulation equipment. As an independent innovation-oriented high-tech enterprise, Firepower possesses China's leading production conditions for inertial navigation and electronic countermeasure products. The company always prioritizes scientific research and technological innovation, as well as self-reliance and control. It is committed to developing a series of autonomous navigation products with independent intellectual property rights, which are widely applied in the autonomous navigation perception fields of unmanned aerial vehicles, vehicles, and ships. With its self-developed array algorithm as the core technology, the company has developed a series of inertial navigation products that can provide users' carriers with key information such as current position, three-dimensional attitude, and speed, thereby achieving precise autonomous navigation control.

Company Advantage

Our Services

Exhibitions

Packaging&Shipping

FAQ

Q: What is your lead time?
A: Stock: 5-15 days in general. No stock: 15-30 days after samples confirmed. Or please contact us by email for specific lead time based on your order quantities.

Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the very beginning to the end:
1) We produce product according agreed technical requirements strictly;
2) We do full tests according to test methology;
3) We have a professional QA/QC team to ensure the quality.

Q: Do you accept OEM or ODM order?
A: Yes, we are professional manufacturer and we are capable for providing both OEM and ODM service by customer's needs.

Q: What are the terms of delivery?
A: We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.

Q: What is the payment way?
A: TT, L/C, Pay later, West Union, Online Bank Payment.

Q: What is warranty?
A: Standardly 12 months and negotiable for longer warranty.

Q: What is the packing quality?
A: For sample order, we use carton box with sponge, and batch order, we use wooden box.

Q: What is final price?
A: For standard product, price is as in the price table; For customized product, price by checking with sales, so as to different quantity needs.

Q: How to choose product?
A: We are professional manufacturer, we could provide standard product on shelf, or products by customer's specific requirements:
1) Choose from MadeinChnia platform or website;
2) Customer raise some certain different technical requirements based on standard products;
3) Customer provide specific and comprehensive technical requirements to sales to evaluate;
4) Customer explain application to sales to provide suitable products.